Archive for January 23, 2018

Designing 3D Characters with Morphi

IMG_4806

Here come our crazy 3D Stanley characters!

On Monday, the 2nd graders had their first experience with 3D design for our 3D printer. We used the Morphi Edu app to create our characters.

After drawing and coloring in our characters, students clicked the 3D button which magically converted the drawings into a 3D shape. The files were emailed to Miss Bosch who prepared them and sent them to the 3D printer.

Now our Dremel 3D printers are busy printing the characters out in white filament! (Later we will be coloring in the characters with Sharpie markers.)

IMG_4793

Students are also writing stories to go along with our characters. We will be turning our characters and stories into an eBook!

We also are going to be exchanging 3D Stanleys with another school! More details to come when we start our exchange!

—————————————————–

Disclosure: As a part of the Dremel 3D Idea Builder Ambassadors program, our school has received the use of a 3D40 printer. If you are interested in learning more about the Dremel Idea Builder 3D40 printer, you may contact https://3dprinter.dremel.com/education-request.  I’d appreciate it if you noted Karen Bosch/this blog post as a referral in the comments/questions section at the bottom of the form.  Thanks!

A Blizzard of Free Snowflakes to 3D Print!

IMG_3547

Our 3d grade students recently designed and printed some lovely 3D Snowflakes. (More information on the lesson here.) We’d love to share four of the snowflake .stl files with you to print on your own 3D printer.

We’d like to track where our snowflakes travel. If you end up downloading and/or printing one, we’d enjoy it if you would let us know:

  • Which snowflake you printed?
  • Where you are located?

You can do this by either leaving a comment on this blog post or by tweeting to @karlyb on Twitter. (A picture of you and the snowflake in your location would be awesome, too!)

Here are the snowflakes. Click on the link below each picture to download the file.

Cydni Snowflake

Download the Cydni Snowflake .stl file

IMG_3543

Download the Christian Snowflake .stl file

IMG_3545

Download the Gabby Snowflake .stl file

IMG_3541 2

Download the Jacob Snowflake .stl file

How to Create 3D Printed Snowflakes with the Morphi App

IMG_3534

The third graders recently worked on a 3D design project. They used 6 point symmetry in the Morphi app to create these gorgeous 3D snowflakes which we printed out on our Dremel 3D printers.

IMG_4696

Students began in Morphi by using the free draw tool. They turned on the axis and then used the + sign to add 6 lines of symmetry. (See the diagram below.) Their designs were each as unique as real snowflakes are!

IMG_3524 2

By simply tapping the 3D button, the line drawings convert into 3D! This definitely is a WOW moment for the students!

IMG_3535

IMG_4697

We used the shape tool to add a “doughnut” shape as a loop. Use the diameter and thickness tools to adjust the size of the loop. This can be a bit tricky for first time users, so I did have to add to loop for a few of the students. Final designs were saved and the .stl file was emailed to the teacher with the student name in the subject line of the email (so I would know who created each file).

IMG_3536

The designs printed beautifully on our Dremel 3D printers! It took about 2 hours to print each snowflake.

IMG_4698 3

A few hints if you try this project:

  • Adjust the line size and make it slightly thicker. The thin lines are fragile when they print and often break.
  • Be sure all lines connect on your snowflake or pieces will fall off the printed snowflake.
  • Designs that are very complex sometimes will not print successfully
  • If your design gets too large, parts will be chopped off and your snowflake will not be round.
  • The Morphi app comes in a free and paid EDU version. You will need the paid version to use the drawing tool. The drawing tool is amazing and allows you to create custom 3D designs.
  • I did make the designs larger using the Print Studio software that comes with the Dremel Printers while I was preparing the files for printing. You could also adjust the size in Morphi, but doing this step later simplified the project for the students.

BUT WAIT, THERE’S MORE! The students have used their snowflakes to inspire some creative writing about the “Secret Life of Snowflakes!” Next week they are going to change their 3D snowflakes into talking animated videos to tell their stories. Stay tuned to see/hear their videos!

—————————————–

Disclosure: As a part of the Dremel 3D Idea Builder Ambassadors program, our school received the use of the 3D40 printer. If you are interested in learning more about the Dremel Idea Builder 3D40 printer, you may contact https://3dprinter.dremel.com/education-request.  I’d appreciate it if you noted Karen Bosch/this blog post as a referral in the comments/questions section at the bottom of the form.  Thanks!